Concrete Contractor in Monument, Colorado

What's different about pouring concrete in Monument

Monument sits at roughly 7,000 feet, about 1,000 feet higher than Colorado Springs proper, which means more snow, colder nights, and a shorter prime pour window (typically May–September). NOAA data for the Palmer Divide records around 105 inches of average annual snowfall here, compared with 38 inches in Colorado Springs. That snow doesn't melt off concrete like it does on the south Front Range; it sits, freezes, refreezes, and grinds the surface if the mix and finish weren't right.

For every Monument pour we add three things to our standard spec: 4,000 PSI minimum with 6% (not 5%) entrained air for the extra freeze-thaw margin, deeper Class 6 base prep (often 6–8 inches because the underlying soils are silty loam over decomposed granite), and a polymer-modified curing compound rather than wet-cure (which can freeze overnight in shoulder seasons).

Common project types in Monument

• Driveway replacement on the 1990s–2000s Jackson Creek and King's Deer builds where original 4" non-air-entrained slabs have spalled out
• RV pads, Monument has more RVs per capita than Springs, and we spec 5–6" with #4 rebar on every one
• New home foundations in Promontory Pointe, Sanctuary Pointe, and the newer Kings Deer phases
• Stamped patios and front entries with reseal plans built around our heavier UV
• Retaining walls for hillside lots near Mount Herman and Inspiration Pointe

Cold-weather pours in Monument

We pour year-round here when the project schedule demands it, using calcium-free accelerating admixtures, insulated blankets, and propane heaters in tents. Cold pours add 8–15% to total cost and are slower, but for a builder under deadline they're routinely the right call. October–March pours we monitor with embedded thermocouples to keep the concrete above 40°F for the first 72 hours per ACI 306.